Advertisement
ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the exercise rack can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile exercise rack has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
1. Attach two Base Pads (17) to the Base (1) with
two M4 x 16mm Screws (42).
Press a Base Cap (16) onto a Base Handle (2).
Repeat with the other Base Handle.
Insert the two Base Handles (2) into the Base (1)
as shown. Insert six M10 x 100mm Bolts (43) up
through the Base. It may be helpful to place
tape over the bolt heads to hold them in
place.
• As you assemble the exercise rack, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
1
43
2
2
16
5
43
17
42
17
42
43
Hide quick links:
Advertisement
