Bowflex Revolution XP Lat Tower Assembly Instructions Manual page 6


Step 3 Install Cross Bar
Parts:
• Cross Bar
Tools:
• 7/32" Allen Wrench
3-1 Align the Cross Bar with the Upper Tower with
the Hooks pointing away from the Upper Tower.
3-2 Install and completely tighten the hardware.
Hardware (1:1):
2 Button Head Cap Screw (3/8" X 4")
Step 4 Install Ropes
Parts:
• Ropes
4-1 Route the Ropes over the top of the Pulleys.
NOTE: When not in use, tuck the ends of the ropes into the
hole in the Upper Tower.
Upper Tower
Assembly
Cross Bar
Hooks
3/8"x 4" Button Head
Rope
Hole
Cap Screw
4 Narrow Washer (3/8")
3/8" Nylock Nut
3/8" Narrow Washer
Upper Tower
2 Nylock Nut (3/8")
Pulley