Leg Extension Attachment Assembly Instructions; Box Contents - Bowflex Power Pro Assembly Manual

Leg Extension Attachment
Assembly Instructions
Thank you for choosing the Bowflex Leg Extension Attachment. This attachment comes complete in
one box, with everything you need to assemble your new accessory. Before you begin, you will need
a crescent wrench, a 5/16" open end wrench. (It is helpful to have the crescent wrench to hold one
end of a bolt while tightening with the other). Please follow these assembly instructions carefully. If
you experience any difficulty, please call a Bowflex customer service representative for assistance
at 1-800-269-3539.
Components for this assembly
are in a box labeled
Leg Extension Attachment

Box Contents

1 Leg Extension Main Frame (with pre-attached
pulleys (2) and left & right brackets.)
1 Leg Extension Pivot Arm
1 Leg Extension Foot
1 Seat (with four "L" brackets attached)
3 Metal Tubes
6 Foam Pads
2 68" Cable
1 Parts/Bolt Bag (See parts & bolt bag
identification page)
Name: 1/4" L Pin
Part #: 90268
Quantity: 1
Name: Rubber Bumper Bolt
Part #: 80151
Quantity: 1
Name: 5/16" x 2" Hex Head Bolt
Part #: 90252
Quantity: 4
Name: M10 Nylon Lock Nut
Part #: 90236
Quantity: 1
The Bowflex Leg Extension Attachment is
an optional attachment. Depending on the
machine and accessories you ordered,
this attachment may or may not be
included.
Name: 3/4" End Cap
Part #: 90218
Quantity: 6
Name: 5/16" Nylon Lock Nut
Part #: 80105
Quantity: 4
Name: M10 Allen Head Bolt
Part #: 90237
Quantity: 1
Name: Allen Wrench
Part #: 90238
Quantity: 1
11