Expanding Your Bowflex With Extra Power Rods - Bowflex Power Pro Assembly Manual

Expanding Your Bowflex With Extra
To expand your Bowflex from 210 lbs to 310 lbs:
Step 1:
Remove your Power Rod pack by removing the four
screws on the back of the Base.
Step 3:
Insert Power Rods into holes. Make sure that slot on bottom of Rods
matches up with ridges in bottom. of hole.
Step 4:
Secure rod with supplied screw by screwing into the bottom of Power Rod.
Replace Power Rod assembly and secure with the four screws.
To expand your Bowflex from
310 lbs. to 410 lbs.:
Step 1:
of the Power Rod Base. Make sure new Rods are
fully seated into Base before using.
Step 2:
Remove plugs in the first two holes of the
Base of the Power Rod pack.
27
Power Rods
Simply slide in new rods to the back