Assembly Steps - Bowflex Revolution Accessory Rack Assembly Instructions Manual

Parts:
• Base Plate (#6)
• Seat Bracket (#8)
• Preacher Curl Mount (#5)
Hardware
• 7/8" Bolts (#13)
• Washers (#16)
Tools:
• Allen wrench (7/32")
Attach the Seat Bracket (#8) to the Base Plate (#6)
1-1
using the hardware as shown in Figure 1.
Attach the Preacher Curl Mount (#5) to the Base
1-2
Plate using the hardware shown in Figure 1.
Tighten hardware completely.
Parts:
• Left Tube (#11)
• Right Tube (#12)
• Base Bracket (#2)
Hardware
• 2 3/4" Bolts (#14)
• Washers (#16)
• Nuts (#15)
Tools:
• Allen wrench (7/32")
• Wrench/Socket (9/16") or Open End Wrench
Attach the Base Bracket (#2) to the Left Tube
2-1
(#11) and Right Tube (#12) using the hardware
as shown in Figure 2. Make sure that the large
holes on the Tube uprights are facing away from
the Base Bracket.
Note: Do not tighten hardware at this time.
Qty
5
5
Qty
4
8
4
�
Figure 1
��
��
Figure 2
step
�
�
��
��
step
�
��
��
��
��
1
2
5