Advertisement
Quick Links
Using IP/P2P with GCC Elite XL8/Elite XL16/Elite XL20
.
Download and install IP/P2P on your
Windows 98 or Windows Me System
Open up IP/P2P from the Programs List.
Now click on the 'Printers' button.
and Elite 12 Series printers.
You will note that the
Max Hops and IP Port
Windows are already
filled in. These values
can remain unchanged
during this installation.
1
Advertisement
Related Manuals for GCC Technologies Elite 12 Series
Summary of Contents for GCC Technologies Elite 12 Series
- Page 1 Using IP/P2P with GCC Elite XL8/Elite XL16/Elite XL20 and Elite 12 Series printers. Download and install IP/P2P on your Windows 98 or Windows Me System Open up IP/P2P from the Programs List. Now click on the ‘Printers’ button. You will note that the...
- Page 2 IP Address of your printer; a name for your printer the port number ‘3300’ a Printer Description such as GCC Elite 12, Elite XL20, Elite XL8 or Elite XL616. Once this information is entered in the appropriate fields you will click on ‘Add’...
- Page 3 Now open your ‘Printers’ Folder Assuming you have already installed your GCC Elite 12 as a local printer it will be available in this window. Place your cursor over the ICON and, using a Right Click select properties from the drop down menu.
- Page 4 At this point you will see your Printer Listed as you entered it in the IP/P2P Window earlier. Select the printer port listed and click ‘Apply’ You will see the below message, click OK. Verify the port is displayed in the Print to the Following Port’...
- Page 5 Now go back to the General Tab. Click on Print Test Page. Your Windows 98 or Windows Me Test Page should print. You may now close the properties window, you have successfully set up LPR Printing for your GCC Printer using IP/P2P.