Using Power Log
Power Log may be used with existing, saved recorded data, or with newly recorded data
from an attached instrument.
Starting Power Log
To use the software:
1. Start up your PC.
2. Start Power Log by selecting the Power Log program icon
Start | Programs | Fluke | Power Log | Power Log
Alternatively, double-click Power Log icon shortcut on your PC desktop.
3. If you are using a 1735, turn on the instrument before you connect the serial cable.
The Power Log software welcome screen shown in Figure 1 displays briefly during the
launch sequence.
The welcome screen is replaced by the following menu bar with a blank pane. The Power
Log main menu displays the communications port (COM1) and menu options.
Figure 1. Power Log Welcome Screen
PC Application Software
Using Power Log
from the menu:
eto001.bmp
eto002.bmp
3