Fisher & Paykel DD36SDFTX2 Installation Instructions Manual page 14

INTEGRATED ONLY - ATTACH VENTING HOSE
9b
Check that the fitted elbow is
rotated left or right (depending
on the direction of the routing),
then ensure the venting hose is
securely attached to it.
ALTERNATIVE METHOD (b) - SECURE BY DRAWER REMOVAL
Fitted Elbow
PULL THROUGH HOSES & MOVE INTO THE CAVITY
10b
vent either
through
same cabinet
or adjacent
cabinet as per
step 7b or 7c
Important!
Ensure correct chassis position. In order
for product to function, cabinetry must
not block the drawer front from closing
hard against the chassis.
Vent Hose
(Integrated
models only)
As you push product in, pull through hoses and
cord, ensuring they don't get kinked or twisted.
Important!
If product cannot be pushed in far enough, pull
out again and rearrange hoses and cord. Do not
use excessive force, as doing so may squash the
hoses and lead to incorrect operation.
14