3M™ Digital Board, Model DB565 and Model DB578. Retain these instructions for future reference. Intended Use The 3M™ Digital Board, Model DB565 and Model DB578, was designed, and intended for use, indoors via a USB data communications cable connected to a desktop or laptop computer. Use in an outdoor operation has not been tested and could damage the whiteboard, peripheral equipment, and/or create a potentially unsafe operating condition.
Page 4
• Use only 3M recommended wall mounting hardware. • Follow all installation instructions carefully. • Make sure mounting screws are properly sized to handle the weight of the 3M Digital Board. • Make sure mounting hardware is securely anchored to a solid structure.
• Use only 3M recommended wall mounting hardware. • Follow all installation instructions carefully. • Make sure mounting screws are properly sized to handle the weight of the 3M Digital Board. • Make sure mounting hardware is securely anchored to a solid structure.
Page 6
WARNING To reduce the risk associated with muscle strain: • Always use more than one person when installing or removing the 3M Digital Board 3. With one person holding each side of the unit, carefully lift it into position so that the bracket slot is above the wall hanger bracket and then lower into mating position onto wall hanger bracket.
Page 8
3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether indirect, special, incidental or consequential regardless of the legal theory asserted.