Table of Contents
Advertisement
Monitoring the Link Status
D-view lets you monitor and modify the link status in a topology.
To monitor the Link Status:
1. Open the topology.
2. Go to Topology > Link Label and then select Link Speed. The status of
the links is displayed.
Figure 89:
3. Go to Advanced > Link Capacity Check, to monitor the link status of all
the devices in a table.
4. Click Check. D-View checks the capacity of each device link port and
displays the minimum capacity value of the link as seen in figure below.
The Topology displays the Link status of the devices
Figure 90:
Link Capacity Check screen
Advertisement
Table of Contents
