Table of Contents
Advertisement
By default, when the topology is imported, the devices are in an unpoll status.
The status of the device is changed to Up or Down when the device is added
ma a
nu lly.
Viewing the Poll Device List
The Poll Device List displays the list of devices after generating the Topology.
1. Go to System > Event Manager > Polling Config > Poll Device List
tab.
2. From here you can delete devices you've added to the list.
From the topology, select the device and right-click to select Add to Poll List or
Delete from Poll List from the popup menu.
Grouping Devices using Device Manager
For monitoring similar devices, you can group devices of the same type using
the Device Group Manager.
1. Go to System > Event Manager > Device Group Manager. The Device
Group Manager screen displays.
Figure 75:
Poll Device List screen
Advertisement
Table of Contents
