Table of Contents
Advertisement
R
ETRIEVING
To identify non D-Link devices, the administrators must first retrieve the OID
of the device and then customize them to add to D-View.
Ensure the device is online to retrieve the OID of the device.
To retrieve the OID of the device:
1. Go to NetTools > MIB Tools > MIB Compiler. The MIB Compiler
screen displays.
2. Enter the device IP address.
3. Set the SNMP Configuration. Refer to
Retrieve Device Information
4. Compile the RFC1213 MIB File and select sysObjectID from the MIB tree.
5. Right-click sysObjectID and select Info. The Browser Result screen
displays.
6. Make a note of the OID value of the device.
OR
1. For a non-designated device module, D-View will identify the device as
GenSNMPDevice type.
2. Double-click on the device. The graphical interface of the device displays.
3. Go to Device Info and then select System Info. The System
InfoGenSNMPDevice Module screen displays.
OID
OF THE DEVICE
Figure 59:
MIB Compiler screen
Setting Up SNMP Configuration to
from devices.
Advertisement
Table of Contents
