General Setup - Audio Pro RXD200 Owner's Manual

General setup

setting up your wireless audio network is real simple. plug n' play
without any software installations. the transmitter and receiver
need power, either through a usB socket on a computer or
through ac adaptor power supply (usB power supply available
separately). connect tXd/rXd to any device with audio input or
output. rXd200 and tXd200 must be set on same house code 1,
2 or 3 to communicate with each other.
setup:
1. set units to same house code 1, 2 or 3.
2. connect tXd200 transmitter to sound source.
3. connect rXd receiver to audio device.
4. connect units to power.
5. play your music wirelessly.
tXd200 transmitter
connect mini usB to usB
power supply. connecting to
computer, see mac/pc setup.
connect your sound source
to the line in (optical or
analogue).
Note:
Using a USB connector on an amplifier or other external equipment
as a power supply for RXD200 can cause noise and interference if
using the analog output. Either use optical output from RXD200 or use
a dedicated Audio Pro USB power supply.
hOuse cOde switch
led status indicatOr
red/Blue flashing - connecting
steady Blue - connected
steady red - no connection
steady Green - paired connected
red/Green flashing -
paired & connecting
rXd200 receiver
connect mini usB to usB
power supply. (audio pro
powered speakers have usB
power supply.) connect your
audio device to the line in
(optical or analogue).