Bios Upgrade - AOpen MX4GE Easy Installation Manual

14. Support 10/100 Mbps LAN Onboard
On the strength of Intel ICH4 on board, it provides 10/100M bps Ethernet for office and
home use, the Ethernet RJ45 connector is located on top of USB connectors. The green
LED indicates the link mode, it lights when linking to network and blinking when
transferring data. The orange LED indicates the transfer mode, and it lights when data is
transferring in 100Mbps mode. To enable or disable this function, you may simply adjust it
through BIOS.
15. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name. After selecting the model name, you can install its AGP, IAA, Audio, LAN
and USB2.0 drivers from this CD.
Del
Green/ACT
Orange/Speed
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps,
and it's STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1. Download the new version of BIOS package
the
(http://www.winzip.com) in Windows environment.
Save the unzipped files into a folder, for example, WMX4GE102.EXE &
2.
WMX4GE102.BIN.
3. Double click on WMX4GE102.EXE, EzWinFlash will detect the model name and BIOS
version of your motherboard. If you had got the wrong BIOS, you will not be allowed to
proceed with the flash steps.
You may select preferred language in the main menu, then click [Start Flash] to start
4.
the BIOS upgrade procedure.
EzWinFlash will complete all the process automatically, and a dialogue box will pop up
5.
to ask you to restart Windows. You may click [YES] to reboot Windows.
Press <Del> at POST to
6.
& Exit Setup". Done!
It is strongly recommended NOT to turn off the power or run any application during
FLASH PROCESS.
16. Power-on and Load BIOS Setup
After you finish jumper settings and connect correct cables, power on and enter
the BIOS Setup. Press <Del> during POST (Power On Self Test). Choose "Load
Setup Defaults" for recommended optimal performance.

17. BIOS Upgrade

download BIOS package (ex:
enter BIOS setup, choose "Load Setup Defaults", then "Save
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU, DRAM,
HDD, etc.) are good enough for turbo
setting.
zip file from our official web site. Unzip
WMX4GE102.ZIP) with WinZip