Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Online Manual
Front Audio Connector
AUX-IN Connector
CD-IN Connector
RealTek RTL8100BL
AC'97 CODEC
S/PDIF Connector
JP27 USBLAN Wakeup Jumper
CNR Connector
32-bit PCI Expansion Slot x3
IrDA Connector
BOOT LED
JP14 CMOS Clear Jumper
USB2.0 Connector
WOL Connector
SYSFAN3 Connector
4Mb Flash ROM BIOS
Chassis Intrusion Connector
Front Panel Connector
ATA 33/66/100 IDE Connector
AOpen reserves the right to revise all the specifications and information contained in this documentation, which are subject to change without notice.
PS/2 Mouse
SPP/EPP/ECP Parallel Port
Connector
USB2.0
Ports
PS/2 Keyboard
COM 1 Port
Connector
RJ45 10/100
LAN Jack
Line-In
Speaker
Out
MIC-In
VGA Port
USB2.0 Port
JP28 USB/Keyboard/Mouse Wakeup Jumper
Resetable Fuse
COM2 Connector
SYSFAN2 Connector
4-pin 12V. ATX Power Connector
Low ESR Capacitors
ADD Slot
(For ADD card only)
478-pin CPU socket
(Willamette/Northwood) with Voltage and
Frequency Auto-detection that supports
®
®
Intel
Pentium
4 1.4~2.4GHz+ CPU
Intel 845GV Chipset
CPUFAN1 Connector
STBY LED
184-pin DIMMx2 supports DDR266/200
DDR SDRAM maximum up to 2GB
ATX Power Connector
FDD Connector
Advertisement
Table of Contents
Related Manuals for AOpen MX4GVR
Summary of Contents for AOpen MX4GVR
- Page 1 4Mb Flash ROM BIOS Chassis Intrusion Connector ATX Power Connector Front Panel Connector FDD Connector ATA 33/66/100 IDE Connector AOpen reserves the right to revise all the specifications and information contained in this documentation, which are subject to change without notice.
- Page 2 “Disable”(1-2), and you may enable this function by setting the jumper to 2-3. I/O Shield x1 USB Channel USB Channel Pin 1 JP27 JP28 PART NO: 49.8B411.E01 DOC. NO: MX4GVR-EG-E0208A Disable Enable Disable Enable (Default) (Default)
-
Page 3: Atx Power Connectors
3. ATX Power Connectors 5. Setting CPU Voltage & Frequency Setting CPU Core Voltage This motherboard comes with a 20-pin and 4-pin ATX power connector as shown below. This motherboard supports CPU VID function. The CPU core voltage will be automatically Make sure you plug in the right direction. -
Page 4: Irda Connector
6. 2 USB2.0 Connectors 8. IrDA Connector This motherboard provides six USB connectors to link USB devices, such as mouse, The IrDA connector can be configured to support wireless infrared module, with this module keyboard, modem, printer, etc. There are four ports on the PC99 back panel. You can use and application software such as Laplink or Windows 95 Direct Cable Connection, the user proper cable to connect other USB connectors to the back panel or front panel of chassis. -
Page 5: Com2 Connector
10. S/PDIF (Sony/Philips Digital Interface) Connector 12. COM2 Connector S/PDIF (Sony/Philips Digital Interface) is a newest audio transfer file format, which provides This motherboard provides two serial ports. One of them is on back panel connector, and the impressive audio quality through optical fiber and allows you to enjoy digital audio instead other is on the upper middle of board. -
Page 6: Bios Upgrade Under Windows Environment
(CPU, DRAM, HDD, etc.) are good enough for turbo setting. 15. AOpen Bonus Pack CD 17. BIOS Upgrade under Windows Environment You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps, and You can use the autorun menu of Bonus CD. Choose the utility and driver and select it’s STRONGLY RECOMMENDED to close all the applications before you start the... -
Page 7: Part Number And Serial Number
IDE cable. The problem should be caused by the Check if the system can IDE cables or HDD itself. reboot successfully. Re-install Windows 95, Windows 98 or Windows NT. MX4GVR is model name of motherboard; R1.02 is BIOS version... - Page 8 Dear Customer, Thanks for choosing AOpen products. To provide the best and fastest service to Test Report: We recommend to choose board/card/device from the our customer is our first priority. However, we receive numerous emails and compatibility test reports for assembling your PC.