Disarming Diagnostics; Table Of Zones - Viper 426FS Owner's Manual

Disarming Diagnostics

Extra disarm chirps are the Tamper Alert. If four chirps are heard when
disarming, the system was triggered so many times that Nuisance
®
Prevention Circuitry has bypassed that zone. In either case, the Status
LED will indicate which zone was involved (see Table of Zones section). The
system will retain this information in its memory, and chirp four of five times
each time it is disarmed, until the next time the ighition key is turned on.

Table of Zones

The zone number is the number of LED flashes used by the system
to identify that input. the standard input assignments are listed below,
along with spaces to write in any optional sensors or switches you have
had installed.
NOTE: If the Warn Away® response is triggered, the LED will not
report it.
ZONE
(# of LED FLASHES)
1
2
3
4
DESCRIPTION
Instant trigger of optional
sensors
A heavier impact trigger from
the shock sensor
Door switch circuit
Ignition
-10-
DEALER-INSTALLED