Disarming Diagnostics; System Status Chirps - Viper 446 Series Owner's Manual

disarming diagnostics

Extra disarm chirps are the Tamper Alert. If four chirps are heard
when disarming, the system was triggered in your absence. If five
chirps are heard, a zone was triggered so many times that Nuisance
Prevention Circuitry has bypassed that zone. The status LED will
®
indicate which zone was involved. (See Table of Zones section of this
guide.) The system will retain this information in its memory, and
continue to chirp four or five times each time it is disarmed, until
the next time the ignition key is turned on.

system status chirps

The siren will chirp when arming/disarming the system. The
pattern of chirps will audibly report the system's status as
described below.
Action Number of Chirps
Arm 1
Arm 1 (3-second delay), 1
Disarm 2
Disarm 4
Disarm 5
16
Description
System armed
System armed with
Bypass Notification
System disarmed
System disarmed with
Tamper Alert
System disarmed NPC
active
© 2002 directed electronics, inc.