Edimax AR-7167WnA User Manual page 25

Default Route
Get IP Address
Static IP Address
IP Subnet Mask
Gateway
NAT
Dynamic Route
TCP MTU Option
IGMP Porxy
When you are done making changes, click on SAVE to save your changes.
in the network. Please specify the MSS range from 100 to 1452 bytes or
0 byte as the default value.
When "Default Router" is enabled, all the packets for destinations not
known by the router's routing table are sent to the default route. By
default, it is enabled.
Choose Static or Dynamic IP Address. If Static IP is selected, please set
the IP Address, Subnet Mask and Gateway obtained from your ISP.
Enter the IP Address assigned by your ISP. Only if you chose Static
above.
Enter the Subnet Mask assigned by your ISP. Only if you chose Static
above.
Enter the Gateway assigned by your ISP. Only if you chose Static above.
NAT (Network Address Translation), an Internet standard that enables a
local-area network (LAN) to use one set of IP addresses for internal
traffic and a second set of addresses for external traffic. When NAT is
enabled, the router will help to make all necessary IP address
translations for the PC connected to the router to access the Internet.
Dynamic routing allows routing tables in routers to change as the
possible routes change. This router supports RIP1, RIP2-B and RIP2-M
protocols for dynamic routing. After the RIP protocol is selected, please
choose the RIP direction from "None", "Both", "IN Only" or "OUT Only".
MTU (Maximum Transmission Unit) determine the maximum size of
each packet in any transmission within the network. Please specify the
MTU range from 100 to 1500 bytes or 0 byte as the default value.
Enable or disable IGMP proxy feature.
21