Ip Address Setting - Edimax AR-7167WnA User Manual

3. IP Address Setting

Using the router to get into the Internet, the PCs in the network must have Ethernet adapter installed
and be connected to the router either directly or through a hub or switch. The TCP/IP protocol of each
PC has to been installed and the IP Address of each PC has to be set in the same subnet as the router.
The router's default IP Address is 192.168.2.1 and the subnet mask is 255.255.255.0. PCs can be
configured to obtain IP Address automatically through the DHCP Server of the router or a fixed IP
Address in order to be in the same subnet as the router. By default, the DHCP Server of the router is
enabled and will dispatch IP Address to PC from 192.168.2.100 to 192.168.2.200. It is strongly
recommended to set obtaining IP address automatically.
This section shows you how to configure your PC's so that it can obtain an IP address automatically for
either Windows 95/98/Me, 2000 or NT operating systems. For other operating systems (Macintosh, Sun,
etc.), please follow the manual of the operating systems. The following is a step-by-step illustration on
how to configure your PC to obtain an IP address automatically for Windows 7, Windows Vista,
Windows XP.
Windows 7
1. Click the Start button and select Control Panel. Double click Network and Internet and click Network
and Sharing Center, the Network and Sharing Center window will appear.
2. Click Change adapter settings and right click on the Local Area Connection icon and select Properties.
The Local Area Connection window will appear.
3. Check your list of Network Components. You should see Internet Protocol Version 4 (TCP/IPv4) on
your list. Select it and click the Properties button.
4. In the Internet Protocol Version 4 (TCP/IPv4) Properties window, select Obtain an IP address
automatically and Obtain DNS server address automatically as shown on the following screen.
6