Alpine IVA-W520R Owner's Manual page 80

Antenna Receptacle
Video Output Connector (AUX OUTPUT) (Yellow)
Output the video.
Audio Output Connectors (AUX OUTPUT)
RED is right and WHITE is left output the audio.
CAMERA Input Connector
Use when connecting a back-up camera.
Video Input Connector (AUX INPUT) (Yellow)
Input the video.
Audio Input Connectors (AUX INPUT)
RED is right and WHITE is left input the audio.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
Steering Remote Control Interface Connector
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
AUX I/O Camera In Connector
iPod AUDIO/VIDEO Input Connector
Connect this to the AV extension cable.
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
Rear Output/Input RCA Connectors
It can be used as Rear Output or Input RCA Connectors.
Front Output/Input RCA Connectors
It can be used as Front Output or Input RCA Connectors.
Subwoofer RCA Connectors
RED is right and WHITE is left.
RCA Extension Cable (Sold Separately)
RCA Output/Input Connector
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switches in the
NORM position.
• Do not make the two switches to different settings.
• Be sure to turn the power off to the unit before changing the switch
position.
Power Supply Connector
BLUETOOTH interface connector (Blue)
Connect this to an optional BLUETOOTH INTERFACE. To
use a hands-free mobile phone, an optional BLUETOOTH
INTERFACE connection is required. For details on
connection, refer to the Owner's Manual of the BLUETOOTH
INTERFACE. You can also connect this to an external
device (such as a portable player) by using Conversion
cable (KCE-237B) for building up the AUX IN (sold
separately).
• Refer to "Setting the AUX+ Mode" on page 42.
ON: When the external device is connected.
OFF: When set to OFF, AUX+ source cannot be selected.
BLUETOOTH INTERFACE Connection Cable
(Included with BLUETOOTH INTERFACE)
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, etc.) equipped with Ai-NET.
• Be sure to set "Setting the Connected Head Unit (MODEL SETUP)"
to "DVD CHG", when the DHA-S690 is connected.
Ai-NET Cable (Included with CD Changer)
USB Connector
Audio Interrupt In Lead (Pink/Black)
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the IVA-W520R.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
81
-EN