Table of Contents
Advertisement
Adjusting Tint of Picture
Setting item: TINT
Setting content: G15 ~ R15
Adjust the colour from G15 to R15. "G MAX" or "R MAX" is
displayed at the maximum of each colour.
• Tint adjustment can be made only in the iPod video, DVD, AUX
modes.
• When the picture from the external input is set to PAL, you cannot
adjust the Tint.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
Adjusting Image Contrast
Setting item: CONTRAST
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. "HIGH"
and "LOW" appear as the maximum and minimum values
specified.
Adjusting Picture Quality
Setting item: SHARP
Setting content: -15 to +15
Picture quality adjustment range is -15 to +15. "SOFT" and
"HARD" appear as the minimum and maximum values specified.
• Picture quality adjustment can be made only in the iPod video, DVD,
AUX modes.
• Picture quality adjustment cannot be made if a Navigation system
with the RGB feature is connected.
Storing Visual EQ
You can store the settings made for "Adjusting Image Brightness, Tint,
Depth, Picture Quality and Contrast."
Setting item: USER MEMORY
Setting content: P-1 / P-2
1 After completing "Adjusting Brightness, Tint, Colour,
Sharpness, and Contrast" (pages 37-38), touch [ ] or
[ ] of USER MEMORY and then select preset number "P-
1" or "P-2" to which the settings are to be stored.
2 After selecting a preset No., touch [MEMORY].
The adjusted Visual EQ mode is stored by the above
operations.
• You can recall the Visual EQ mode stored here from P-1 or P-2 of
"Selecting the Visual EQ Mode (Factory's setting)" (page 37).
38
-EN
GENERAL Setup
General Setup Operation
The Parking Brake must be engaged to access the GENERAL
mode screen. Attempting to access this screen while driving will
display the warning-CAN'T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
"Setting item" of GENERAL Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [GENERAL SETUP].
The GENERAL SETUP screen appears.
3
Touch [ ], [ ] or [
change its setting.
Setting items:
CLOCK / CLOCK ADJUST / SUMMER TIME /
DEMONSTRATION / BEEP / AUTO SCROLL /
LANGUAGE SELECT / LED DIMMER LEVEL
4
Touch [
] to return to the previous screen.
Touch and hold [
] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Displaying the Time
The clock indication on the monitor display is turned on or off
respectively.
Setting item: CLOCK
Setting contents: OFF / ON
] etc., of the desired item to
Hide quick links:
Advertisement
Table of Contents
