Advertisement
9 Select the "Networks" button in the "Network Setup" dialog box.
10 Click on the "Install Microsoft Windows Network:" option, and click "OK".
11 Click the "Drivers" button from the "Network Setup" dialog box, and click
on "Add Adapter".
12 Click "OK" to accept the default choice of "Unlisted or Updated Network
Adapter".
13 Type the path "A:\WFW" in the "Install Driver" dialog box, and then insert
the Intel EtherExpress drivers disk into the floppy drive, and click "OK".
14 Select "Intel EtherExpress [TM] PRO/10 LAN Adapter" in the "Unlisted or
Updated Network Adapter" dialog box, and click "OK".
15 Click "OK" in the "Intel EtherExpress [TM] PRO/10 LAN Adapter" dialog
box to confirm the interrupt, Base I/O, the Transceiver Type, Link Speed,
Power Management, AllFramesCRT, DynamicCRTMax,
DynamicCRTIncrement, and the DynamicCRTInterval settings.
16 Make sure that the "Intel EtherExpress [TM] PRO/LAN Adapter [NDIS2/
NDIS3]" is selected in "Network Drivers".
17 Accept the list of Protocols listed and click on the "CLOSE" button.
18 At the "Network Setup" dialog box, click on "OK".
19 Specify your User Name, Workgroup, and Computer Name in "Microsoft
Windows Network Names" dialog box, and click on "OK".
20 When prompted for the file "EPRO.DOS", insert the Intel EtherExpress
driver disk and set the path to "A:\NDIS\".
21 Finish the network card installation by clicking on "OK" in the "Network
Setup" message.
22 To complete the installation, click on "Restart Computer" button in the
"Windows Setup" dialog box.
13 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter
Connecting to a Novell NetWare 4.11 Server
Advertisement
