To remove a memory card:
Make sure that the left-side modular drive status indicator (see
indicators" on page
notebook.
Important
Using the memory card reader externally
You can use the memory card reader without inserting it in the modular bay.
To use the memory card reader externally:
1
Plug the cable that has been provided into the port on the memory card
reader.
2
Plug the other end of the cable into a USB port on your notebook or port
replicator.
27) is off, then pull the memory card out of the
Do not use the remove hardware
to remove the memory card.
www.gateway.com
Using the optional memory card reader
icon in the taskbar
"Status
157