Recording And Playing Audio - Gateway M675 User Manual

Important

Recording and playing audio

Use the following instructions to make an audio recording by speaking into a
microphone.
To make an audio recording:
1
Plug a microphone into the Microphone jack on your notebook. For the
location of the Microphone jack, see
-OR
Plug a microphone into the Microphone jack on your port replicator. For
the location of the Microphone jack, see
2
Click
Start
. The Sound Recorder opens.
Recorder
3
Click (record), then speak into the microphone.
If you are configuring a jack for stereo in, and you want to
hear the input signal through your speakers, you must also
set up your notebook for audio pass through. Click Start,
All Programs, SigmaTel, then click Audio PassThru
Control Panel. The Pass Through dialog box opens. Make
sure that the Pass Through check box is selected. Click
X in the top-right corner of the dialog box to close it.
, ,
All Programs Accessories
Rewind Play
Fast Forward
www.gateway.com
Recording and playing audio
"Left Side" on page
"Back" on page
, , then click
Entertainment
Record
Stop
3.
269.
Sound
99