Gateway TM 5150 User Manual page 64

Note:
Turning your notebook
completely off when the
power button is set for On/
Off mode causes every part
of your notebook to turn off.
Any unsaved work will be
lost! Pressing the power
button will restart your
notebook.
Caution!
Any unsaved work can be
lost if you hold the power
button down for too long.
62 Using Your Gateway Solo™ 5150 Multimedia Notebook
Power button (switch) settings
When the power switch setting in the Power (BIOS Setup) menu is On/Off
and your notebook is:
Off, press the power button to turn your notebook on.
On, press the power button to turn your notebook completely off.
When the power switch setting in the Power menu is Suspend/Resume and
your notebook is:
Off (or in Suspend mode), press the power button to resume power to
your notebook.
On, press the power button to cause your notebook to enter Suspend
mode.
Press and hold the power button for about five seconds to turn your
notebook completely Off.
1. Start up your notebook.
2. Press the F2 key when prompted to do so. The "Entering Setup..."
message briefly shows and then the Main menu appears.
Using the right arrow key, move to the Power menu.
3.
4. The first available option is Power Switch. If the setting displayed is
the one you want, go to Step 6.
Press the S
5.
PACEBAR
Press the E key to access the Exit menu.
6.
SC
Press E to Save changes and exit, then press E
NTER
arrow key to select any other option.
to change the setting.
or use the down
NTER