Starting Up Your Notebook - Gateway TM 5150 User Manual

14 Using Your Gateway Solo™ 5150 Multimedia Notebook

Starting up your notebook

Once the battery is installed and the AC power adapter is plugged in, you
are ready to start up your notebook.
Press in on the LCD panel latch to release and open the LCD panel.
1.
2. Tilt the LCD panel to adjust for the proper viewing angle.
Press the power button.
3.
The power button is preset to On/Off mode. You can set it to function
either in On/Off or Standby/Resume mode using the BIOS setup
program. See "Modifying the power button mode" on Page 56 for
more information about changing power button modes.
4. Press or
F + F
N N
repeatedly to get the desired brightness.
to change display brightness. Press the arrow key
+
A