Gateway AD-520 User Manual page 28

Chapter 2: Connecting Your DVD Player
2
Connect the AC-3 toslink digital audio jack on the back of your DVD player
to the AC-3 toslink digital audio in jack on your receiver.
-OR-
Connect the coaxial out jack on the back of your DVD player to the coaxial
in jack on your receiver.
3
Connect your receiver to the television. For more information, see the
user's guides that came with your receiver and television.
4
Plug the power cord into a wall outlet.
Important
22
You need to configure the DVD player for digital audio
output. For more information, see
page 57.
You may also need to configure your receiver for digital
audio input. For more information, see the user's guide that
came with your receiver.
www.gateway.com
"Audio Setup" on