No Picture; Picture Has Shadows Or "Ghosts; Image Is Not Sized Or Centered Correctly - Gateway FPD1975W User Manual

www.gateway.com

No picture

Picture has shadows or "ghosts"

Image is not sized or centered correctly

Press the Input button to make sure that you have selected the correct
■
video source.
Make sure that the power cord is connected correctly to both the back of
■
the monitor and the wall outlet. For more information about connecting
the power cord, see
Make sure that the video cable is connected securely to the back of the
■
monitor and computer. For more information about connecting the video
cable, see "Connecting the monitor" on page
Make sure that the monitor is turned on.
■
If the power LED is orange:
■
Make sure that your computer is turned on.
■
Move the mouse or press any key on the keyboard to bring the
■
monitor out of sleep mode.
Restart your computer with the monitor turned on.
■
Make sure that the video cable is not damaged.
■
Check the end of the video cable for any pins that might be bent
■
or pushed in.
Turn off the monitor and unplug the video cable from the back of your
■
computer. Turn the monitor back on and wait for ten seconds. If the
monitor is functioning correctly, a "No Signal" message appears. For more
information about connecting the video cable, see
monitor" on page 2.
Press the button to automatically adjust the display image to the
■
Auto
ideal settings.
Remove any extension cables or switchboxes.
■
Make sure that the video cable is connected securely to the back of the
■
monitor and your computer. For more information about connecting the
video cable, see "Connecting the monitor" on page
Make sure that the video cable is not damaged.
■
Check the end of the video cable for any pins that might be bent or pushed
■
in.
Press the Auto button to automatically adjust the display image to the
■
ideal settings.
Use the position controls to adjust the image. For instructions on how to
■
adjust the display image position, see
page 13.
"Connecting the monitor" on page
"Adjusting monitor settings" on
Troubleshooting
2.
2.
"Connecting the
2..
23