Gateway FPD1975W User Manual page 7

www.gateway.com
Connect the blue right-angle VGA video cable to the blue video connector
4
under the back of the display. Although a standard VGA cable is
acceptable, we recommend using the right-angle cable (available in the
U.S. at www.gateway.com), especially for use with the optional speaker
bar. The right-angle cable's thumbscrews are easier to tighten, and the
cord does not get in the way of the speaker bar.
- OR -
If your computer has a digital video connector (DVI), connect a white DVI
video cable (available in the U.S. at www.gateway.com) to the white
connector under the back of the display. Although a standard DVI cable
is acceptable, we recommend using the right-angle cable (available in the
U.S. at www.gateway.com), especially for use with the optional speaker
bar. The right-angle cable's thumbscrews are easier to tighten, and the
cord does not get in the way of the speaker bar.
Make sure that your computer is turned off, then connect the other end
5
of the video cable to the matching video port on the back of your
computer.
Plug the power cord into a correctly grounded electrical outlet.
6
Connecting the monitor
3