No Picture; Display Colors Are Wrong - Gateway FPD1530 User Manual

No picture

■ Make sure that the power cord is connected correctly to both the back of the monitor
and the wall outlet. For more information about connecting the power cord, see
"Connecting the monitor" on page 2.
■
Make sure that the video cable is connected securely to the back of the monitor and
your computer. For more information about connecting the video cable, see
"Connecting the monitor" on page 2.
■ Make sure that the monitor power button is turned on.
■ If you have two computers connected to the monitor (FPD 1830 and FPD 1930 only),
press the
SOURCE/SET
computers. For more information about the
controls" on page 7.
■
If the power LED is orange:
Make sure that your computer is turned on.
■
Move the mouse or press any key on the keyboard to bring the monitor out of
■
Active Off mode.
Restart your computer with the monitor turned on.
■
Make sure that the video cable is not damaged.
■
Check the video port and the end of the video cable for any pins that might be
■
bent or pushed in.
■ Turn off the monitor and unplug the video cable from the back of your computer.
Turn the monitor back on and wait for ten seconds. If the monitor is functioning
correctly, a self-diagnostic screen appears. For more information about connecting the
video cable, see "Connecting the monitor" on page 2.

Display colors are wrong

■ Press the
AUTO/SET
automatically adjust the display image to the ideal settings. For more information,
see "External controls" on page 7.
■ Restart your computer with the monitor turned on.
■ Make sure that the video cable is connected securely to the back of the monitor and
your computer. For more information about connecting the video cable, see
"Connecting the monitor" on page 2.
■
Make sure that the video cable is not damaged.
■ Check the end of the video cable for any pins that might be bent or pushed in.
18
button on the front of the monitor to switch between
or button, depending on the monitor model, to
AUTO
www.gateway.com
button, see "External
SOURCE/SET