Device Driver Installation And Configuration; Configuring Windows 95 - ActionTec 56K Internal PC Modem User Manual

56k internal pci call waiting modem

Table of Contents

Device Driver Installation and Configuration

Step 1

After you have installed the modem into your machine, turn on the power

and allow the system to boot normally.

Step 2

After Windows 95 loads, it will detect new hardware. The modem will be

identified as a "PCI Card". Make sure the option "Driver from disk pro-

vided by hardware manufacturer" is selected, then click the OK button.

Step 3

Windows will prompt you to insert the modem's installation CD-ROM.

Check the drive path for the correct drive letter. It may be necessary to

change the drive letter to that of the CD-ROM drive. Insert the installation

CD-ROM into the computer's CD-ROM drive, wait ten seconds so that

the CD-ROM drive can read the disc, then click OK.

Step 4

Windows will find the driver on the installation diskette and finish the

installation process.

Table of Contents

Do you have a question about the 56K Internal PC Modem and is the answer not in the manual?

Pci modem