Send - Icom IC-M802 Quick Reference Manual

Digital Communications - Made Simple for Cruisers
8. Next start the digital text process communications with the modem. All station(s)
wanting to hear and/or send digital
information must initiate the process by:
a. Type "Listen 1" and press "Enter".
b. Your computer may return with "***
LISTEN-MODE: 1" depending on where
the modem was last set.
c. Your modem is now listening.
d. You will now hear any PACTOR
modems sending messages on the
selected frequency.
e. Press "Esc" key to return to the "cmd:"
prompt.

Send

9. To text to all stations in the listening
mode:
a. Type "UN" and press "Enter".
i. This is the abbreviated version
of the UNPRO Command.
b. The computer should display
"UNPROTO TRANSMISSION ACTIVE -
MODE 1: FSK 100 BD >>"
c. The computer display will move to a blank line ready for typing.
d. Type your message(s)
10. I would suggest starting your message with your call sign and end it with your call sign if
your message is more than 10 lines.
a. Example:
Send a Short Message
XF1-AD7XL: Now is the time for all good
men to come to the aid of their
Party and that Party is at Geary's house on
th
the 4 of July.
www.made-simplefor-cruisers.com Published: 7/10/12