Gtp 1350 Parts - Garrett Graphic Target Profiling 1350 Owner's Manual

GTP 1350 PARTS

Before assembling your GTP 1350 metal detector
ensure you have the complete set of parts, which
include:
• Control Housing with S-shaped Ramrod Stem
• Upper Stem
• Lower Stem with Spring Clip
• Two (2) Mounting Washers
• One (1) Wing Nut
• One (1) Threaded Bolt
• Searchcoil with Cable
• Instruction Video
• Warranty Registration Card
If any part is missing, please contact your local dealer.
Graphic Target Profiling 1350
™