Pinpoint / Profiling; Last Mode - Garrett Graphic Target Profiling 1350 Owner's Manual

PINPOINT (Coin Depth) / PROFILING Touchpad
Press and hold the PINPOINT touchpad to enter
the PINPOINT Mode and find the exact location and
coin depth of a target.
When the PINPOINT touchpad is released the
PROFILING feature will automatically turn ON
to provide target size information. To exit the
PROFILING feature, briefly press and release the
PINPOINT / PROFILING touchpad again.
When enabled, the PROFILING feature visually
indicates the size (Small, Medium, Large) of detected
targets on the LCD screen as well as with three (3)
distinct audio durations.
(See page 27—30 for more information).
LAST MODE Touchpad
Returns the detector to the previous Discriminate
Mode. This feature can be used to rapidly switch
between two (2) selected modes, such as COINS
and RELICS.
Graphic Target Profiling 1350 1
™