Cisco Prisma II Technical Bulletin page 8

2.5g 2:1 bdr-i receiver and chassis issue

Hide thumbs Also See for Prisma II:

Table of Contents

Upgrade Procedure

Setting Up the FTP Connection

Enter the IP address of the FTP server in the "FTP Host:" cell.

Enter the FTP User and FTP Password for the account set up earlier.

Enter the directory on the FTP server that contains the current Prisma II release

files.

Verify the FTP connection by clicking on "Test FTP". The message "FTP

Connection OK" should be displayed. If not, then troubleshoot the FTP

connection. The FTP server should be able to ping the ICIM2.

Click OK.

SOUP should display a list of the installed Prisma II modules.

Result: The following screen or one similar appears.

SOUP should identify the modules in need of updating by placing a check in the

box in the first column. If any modules are identified for updating that the

operator does not wish to upgrade at this time, unselect these modules.

78-4032387-01 Rev C

Table of Contents