Cisco Prisma II Technical Bulletin page 11

Setting Up An FTP Server
You may prefer to store and serve the firmware upgrade files on the same local
computer on which you run the Transport System firmware upgrade utility. This
can be done by installing FTP server software on the local computer and making the
firmware upgrade files available from there.
Setting Up FTP Server Software on Your Local Computer
FTP server software is available for download from various Internet sites. An
Internet search on the term "FTP server" will yield many results. The software used
in this example is Cerberus FTP Server software, which is available for download
from the Cerberus web site at www.cerberusftp.com.
Disclaimer: Cerberus is used as an example only. The version you download may
be different from the one shown below. This example is meant to be a general
guideline for setting up a local FTP server. Use the FTP server software that you are
familiar with. Consult your Information Technology department for support.
Complete the following steps to install and configure the Cerberus FTP Server
software.
Download the Cerberus FTP Server software from www.cerberusftp.com and
1
follow the installation instructions to install the software on your computer.
When installation is complete, start the Cerberus FTP Server program.
2
Result: The following Cerberus Getting Started Wizard – Licensing screen
appears.
78-4032387-01 Rev C
Setting Up An FTP Server
11