Advertisement
The front-panel controls are divided into four main groups
of buttons and knobs:
SYSTEM SETUP
CHANNELS
TIMEBASE + TRIGGER
ZOOM + MATH
Other buttons access special features.
Dark gray menu entry buttons (also present in other groups of
controls) provide access to the main on-screen menus and the
instrument's acquisition, processing, and display modes. The
SCREEN DUMP and CLEAR SWEEPS buttons copy or print the
screen display, and restart operations that require several
acquisitions. (See page 4–5.)
The seven untitled buttons vertically aligned beside the screen,
RETURN and the two linked rotary knobs enable on-screen
menu selection. (See following pages.)
This group of controls offers selection of displayed traces and
adjustment of vertical sensitivity and offset. (See Chapter 5.)
These controls allow direct adjustment of time/division, trigger level
and delay, as well as access to the "TIMEBASE" and "TRIGGER"
menu groups. (See Chapters 6, 7, and 8.)
This group controls trace selection, movement, definition, and
expansion with Zoom and Math functions. (See Chapters 9 and 10.
This blue button automatically adjusts the scope to acquire and
display signals on the active input channels. (See page 4–6.)
This green button accesses the unique Analog Persistence
feature. (See Chapter 11.)
Redraws the grid to fill the entire screen. (See Chapter 11 . )
Part 2, "Getting Started," in the
for more information about the front panel,
and a complete run-through of the controls.
ISSUED: December 1999
LCXXX-OM-E Rev K
Advertisement
