After Switching Over - Miele KM 2030 Instructions For Installation And Use Manual

After switching over

^ Use the reverse order to re-assemble
the burner parts.
^ Before putting the upper part of the
appliance back in place, light each
burner with matches to test the seal
on all the gas flow parts.
^ After testing, set aside the loose
burner parts.
^ Put the upper part of the appliance
back in place.
^ Screw down the lower part of the
burner, then put the loose burner
parts back into place, making sure to
follow the right order.
^ Put the control knob back on.
^ Finally, check the flame behaviour of
each burner.
The flame must not go out in the low
setting, even if the control knob is
quickly turned from "high" to "low".
At the high setting, the flame needs to
burn with a clearly visible core.
^ In the nozzle pack, find the
appropriate sticker for the new gas
type and stick it over top of the
previous sticker.
How to switch to a different gas type
41