Stainless Steel Recess; Burner Grate, Control Knob - Miele KM 2030 Instructions For Installation And Use Manual

Cleaning and care

Stainless steel recess

To clean this area, use only a soft
sponge with some dish liquid and warm
water. Pre-soak any stubborn residue
before cleaning.
After cleaning, dry the recess
thoroughly with a soft cloth.
If needed, you can use the glass
ceramic and stainless steel cleaner
(see the section on "Optional
accessories"). Make sure to only use
the product in the direction of the grain
(ridges).
Do not use any stainless steel
cleanser on or around the printing.
This would rub off the printing. Use
only a soft sponge with some dish
liquid and warm water to clean this
area.
To keep the surfaces from quickly
becoming soiled again, we recommend
treatment with a stainless steel care
product (see the section on "Optional
accessories").
Using a soft cloth, apply the product in
a thin, even layer.
20

Burner grate, control knob

Remove the burner grate. To clean the
grate and knob, use a soft sponge with
some dish liquid and warm water.
Pre-soak any stubborn residue before
cleaning.
Dry all surfaces with a clean, soft cloth
after cleaning.
Do NOT clean the burner grate in
the dishwasher.