Installation - Miele KM 2030 Instructions For Installation And Use Manual

How to make the countertop
cut-out
^ Use the template to make a
countertop cut-out.
Be sure to observe the minimum
distance from the rear wall and from
the left or right to a side wall.
See the section on "SAFETY
NOTICES FOR INSTALLATION".
^ Seal any wooden countertop
surfaces with a special varnish,
silicone rubber, or resin, to help
prevent swelling from moisture.
The materials used must be
temepature-stable.
If, during installation, you find that
the frame is not tightly sealed to the
countertop at the corners, then the
corner edges, ß R4, can be carefully
trimmed with a jigsaw.
How to install the gas stovetop
^ Feed the appliance power cord
downward through the countertop
cut-out.
^ Set the appliance loosely into place
in the cut-out.
^ Connect the appliance to the power
supply (see the section on "Electrical
connection").
^ Establish the gas connection (see the
section on "Gas connection").
^ Use the supplied brackets to hold the
appliance in place.

Installation

31