Display Of The Transmitter's Name (Name); Display Of The Transmission Power Setting (Rf Power); Display Of Audio Input Level (Input Level); Display Of The Low-Cut Filter Setting (Lcf) - Sony DWRS02D/14 Operating Instructions Manual

transmitter does not have the metadata
transmission function.
Display of the Transmitter's
Name
(NAME)
The name of the transmitter from which
transmission is currently being received is
displayed.
Display of the
Transmission Power
Setting
(RF POWER)
The transmission power setting of the
transmitter from which transmission is
currently being received is displayed.
Display of Audio Input
Level
(INPUT LEVEL)
The audio input level setting of the
transmitter from which transmission is
currently being received is displayed.
Display of the Low-cut
Filter Setting
(LCF)
The low-cut filter setting of the transmitter
is displayed.
Display of the Power Save
Setting
(POWER SAVE)
The power save setting of the transmitter is
displayed.
Display of Accumulated
Battery Use Time
The accumulated battery use time of the
transmitter is displayed.
Display of the +48V Power
Setting
The +48V power setting of the transmitter
is displayed.
Cross Remote
This function must be set to allow the
wireless remote control function to be used
between the transmitter and receiver.
OFF: Stops the wireless remote control
function.
ON: Starts the wireless remote control
function with the previously paired
receiver.
PAIRING: Executes a new pairing.
For details, see "Using the Cross Remote" on
page 24.
(TIME)
(+48V)
(RF REMOTE)
TX (Transmitter Virtual) 1/2 Menu 23