Security Menu (Continued) - NEC LC1400 Service & Reference Manual

Security menu (Continued)

Feature Choices
Set Supervisor Press ENTER
Password
Password on Boot Disabled
Enabled
Diskette Access Administrator
User
Fixed Disk Boot Normal
Sector Write Protect
Secure Mode Disabled
Timer 1 min
2 min
5 min
10 min
20 min
1 hr
2 hr
Secure Mode Hot [ ]
Key [A, B, ..., Z]
(Ctrl-Alt- )
Secure Mode Boot Disabled
Enabled
Video Blanking Disabled
Enabled
Floppy Write Disabled
Protect Enabled
Description
When the <Enter> key is pressed, the
user is prompted for a password; press
ESC key to abort. Once set, this can be
disabled by setting it to a null string, or by
clearing password jumper on system
board (see Configuring System Board
Jumpers).
Requires password entry before boot.
System will remain in secure mode until
password is entered. Password on Boot
takes precedence over Secure Mode
Boot.
Controls access to diskette drives.
Write-protects boot sector on hard disk to
protect against viruses.
Period of key/PS/2 mouse inactivity
specified for secure mode to activate. A
password is required for secure mode to
function. Cannot be enabled unless at
least one password is enabled.
Key assigned to invoke the Quicklock
feature. Cannot be enabled unless at least
one password is enabled.
System will boot in secure mode. The
user must enter a password to unlock the
system. Cannot be enabled unless at
least one password is enabled.
Blank video when secure mode is
activated. The user must enter a
password to unlock the system. Cannot
be enabled unless at least one password
is enabled.
When secure mode is activated, the
diskette drive is write protected. The user
must enter a password to disable. Cannot
be enabled unless at least one password
is enabled.
Configuring Your System 3-11
Your Setting