Connecting To External Output Equipment; Connecting To An External Monitor; Connecting To An External Speaker (When Using The Emp-82/62) - Epson EMP-X3 User Manual

Connecting to External Output Equipment

Connecting to an External Monitor

Analogue RGB images and RGB video images from a computer that are
being input to the Computer/Computer1 port can be viewed on an external
computer monitor at the same time they are being projected by the
projector, so that the images can be checked at times such as when giving
presentations.
If the images being projected are from a source that is connected to the
Computer2 port, these images cannot be output to an external monitor.
Connect the external monitor using the cable that is provided with the
monitor.
Monitor port
Cable provided with monitor
• Component video, S-Video, and composite video images
cannot be output to an external monitor.
• The setting gauge for keystone correction and the
configuration menus and help menus are not output to
the external monitor.
To Monitor Out port (black)
Connecting to an external speaker (when using the
EMP-82/62)
You can connect speakers with built-in amplifiers to the projector's Audio
Out port in order to enjoy a fuller quality of sound.
Use a commercially-available audio cable with pin jack
(3.5 mm) plugs or similar.
Use an audio cable with plugs that match the ports for the external audio
equipment.
To external audio equipment
Audio cable
(commercially available)
When a stereo mini-jack audio cable is inserted into the
Audio Out port, the sound will be output to external
speakers. No sound will be output from the projector's
built-in speaker at this time.
⇔
stereo mini jack
To Audio Out port
66