Rear (Emp-X3) - Epson EMP-X3 User Manual

Part Names and Functions

Rear (EMP-X3)

•
Computer port
sp.i
Inputs analogue RGB video signals from a
computer and RGB video signals and
component videog signals from other video
sources.
•
Monitor Out port
sp.66
Outputs the projected computer's analogue
RGB signals or RGB video signals to an
external monitor from the source that is
connected to the Computer port. This
feature is not available for video equipment
signals.
•
Power inlet
sp.iii
Connects to the power cable.
•
Rear adjustable foot
• •
S-Video port Video port
sp.ii sp.ii
Inputs S-Videog Inputs
signals to the videog
projector from other the projector from
video sources. other video sources.
•
Audio port
sp.ii
Input audio signals from connected external
equipment.
When you are connecting two or more pieces of
external equipment that use the same input port,
you need to disconnect one before connecting
the other, or use an audio selector.
•
USB port sp.23,
Connects the projector to a computer via the
composite
USBg cable when using the wireless mouse
signals to
function.
Computer images cannot be projected
by using the USB cable to connect the
computer.
•
Remote control light-receiving
area
Receives signals from the remote control.
•
Speaker
p.70
sp.i
8