Rear (Emp-82/62) - Epson EMP-X3 User Manual

Part Names and Functions

Rear (EMP-82/62)

•
Computer1 port
sp.ii
Inputs analogue RGB video signals
from a computer and RGB video
signals and component videog
signals from other video sources.
•
Audio port
sp.ii
This is used to input audio signals
from the equipment that is
connected to the Computer1 port.
•
Power inlet
sp.iii
Connects to the power cable.
•
Rear adjustable foot
•
Monitor Out port
sp.66
Outputs the projected computer's analogue RGB
signals or RGB video signals to an external
monitor from the source that is connected to the
Computer1 port. This feature is not available for
video equipment signals.
•
Audio Out port
This outputs the audio signals from the currently-
selected input source to external speakers.
•
Computer2 port
sp.ii
Inputs analogue RGB video signals
from a computer and RGB video
signals and component videog
signals from other video sources.
•
Audio port
sp.ii
This is used to input audio signals
from the equipment that is
connected to the Computer2 port.
•
RS-232C port
Connects the projector to a computer using an
RS-232C cable. This port is for control use and
should not normally be used.
•
S-Video port
Inputs
video sources.
•
Video port
Inputs
other video sources.
•
Audio port
This is used to input audio signals from the equipment
that is connected to the S-Video or Video port.
•
USB port sp.23,
sp.71
Connects the projector to a computer via the
cable when using the wireless mouse function.
Computer images cannot be projected by the
projector by using the USB cable to connect the
computer.
sp.ii
S-Videog signals to the projector from other
sp.ii
composite videog signals to the projector from
sp.ii
•
Remote control
light-receiving area
Receives signals from the remote
control.
•
Speaker
p.70
9
sp.i
USBg