User Manual Haier Solar Water Heater Models GV110RNMB(*) GV150REMB GV200REMB GV270REMB *:Model without electric auxiliary heating function. Table of Contents Safety cautions Product features Technical parameters Installation instructions Operation instructions Troubleshooting Packing list Please read through the manual before use.
Safety cautions (please read the cautions before use) Description of symbols Behaviors that Directions that Directions that are prohibited must be noted. must be followed. Warning Caution Prohibit Warning! Improper operation of the following may lead to personal injury or even death! Do not touch glass vacuum tube, Personnel other than professional pipes and valves for supplying...
4.Tower type frame The tower type frame, made of carbon steel by means of spray processing, has the advantages of a stable structure, attractive appearance and corrosion resistance. Technical parameters Model GV200REMB GV270REMB GV110RNMB GV150REMB 58mm X 1800mm, Specifications of the...
Page 4
1725 1000 1490 1600 1725 1320 GV150REMB 1490 GV200REMB 1957 1725 1775 1490 GV270REMB 2597 1725 2435 1490 Note: The permitted error limit of the parameters above is 10%. Diagram of appearance structure Water outlet Electric heating tube Tank support...
Page 5
Installation instructions Frame assembly Please see the related paper in the frame package for the diagram of the frame and packing list. Frame fastness 1. For horizontal water heaters, it is recommended to fix the feet of the heater onto the foot foundation with embedded iron parts or make a concrete brick with expansion bolts and then fix the feet of the heater to the expansion bolts.
Page 6
Installation instructions Installation of vacuum tubes 1.Keep the tubes out of the sunlight before assembling the tubes to avoid being burned. 2.Place the air seal ring around the vacuum tubes (Figure A); 3.Insert the tubes into the seal ring with even pressure and a twisting motion. The resultant force direction shall be consistent with the axial direction of the vacuum tubes;...
Page 7
Installation instructions Precautions on pipeline installation Diagram of pipeline installation 1. Any alteration to the structure of the solar Over flow port water heater may cause problems in use. Electric 2. There are five ways to connect the water heating Air supply hole tube pipe to the room: flue, vent hole, through-...
Remove the blockage or change the due to a blockage in front of it location for installatio Dust on the tube Clean the tube surface Packing list Quantity Main parts GV200REMB GV270REMB GV150REMB GV110RNMB Water tank (PC) Manual (Copy) Water tank package Tank support (PC)