Advertisement
Parts and Functions
Buttons of the wired controller
Mode switch
Choose running mode
recommend setting temp.
cooling:26~28
dehumidify:21~24
heating:22~24
blow:temp. neednot set
Healthy switch
Used to control
oxygen function and
negative ion (when
oxygen device and
n e g a t i v e - i o n
generator exist at the
same time, the
s w i t c h
w i l l
function)
Timing switch
It is used for choosing timing running
Self-inspection switch
It is used for inspection service
Filter reset
After cleaning air inlet and filter, press
this switch. The unit begins to run
HEALTH
SET
RECOVERY
CHECK
9
Fan speed switch
Change wind speed
Swing switch
Open and close air flap
TEMP /TIME switch
used to regulate setting temp.,
time.
Clock, timing and address setting
Air change switch
It is used to open and close air
change function. The mode is
as follows:
No display-air change
(automatic)-air change (heating)
-air change (usual)
no
exchange
exchange
display
whole heat
Autolly
ON/OFF switch
Do on and off function. The unit is
on when pressing it; and is off when
pressing it again (needn t to open
front cover)
Reset key
When in abnormal state, push the reset key
with a spike, which may return the unit to
normal
exchange
ordinary
Advertisement
