Setting The Saw Chain - Echo CS-500P Instruction Manual

Drive link
Right hand cutter
Keep this angle
20LPX : 25°
20BPX : 30°
Push file as shown
Hold the file tipped 10° upward

SETTING THE SAW CHAIN

Preset tie strap
Tie strap
Sharpen lower edge
10°
Left hand cutter
Guard link
Important points for proper maintenance of saw
chain:
aligned.
- Note that blunt or irregular cutters will result in
poor cutting performance, increased vibration
of chains and premature breakage of the saw
chain.
groove of the guide bar.
Keep the lower edge of the drive link sharp
where indicated.
SETTING SAW CHAIN
diameter 3/16 in.) and flat file are used.
the file holder (Sure Sharp
27
Top plate
Side plate
Depth gauge
®
).
CS-500P