Table of Contents
Advertisement
Unlock chain brake
Throttle trigger
CS-500P
RUNNING
STOPPING
Ignition switch
NOTICE
If engine does not stop, pull choke control knob
out fully to stop engine.
Return the unit to your authorized ECHO dealer
to check and repair stop switch before starting
the engine again.
CHECKING CHAIN TENSION
Do not operate with a loose chain.
CHAIN LUBRICATION TEST
Hold the chain just above a dry surface and open
the throttle to half speed for 30 seconds.
A thin line of "thrown" oil should be seen on the
dry surface.
16
minutes.
before starting to cut.
revolution of the engine.
reaches 3900 r/min approximately.
chain and bar.
unnecessarily.
throttle trigger is released.
down to "O" position.
during work and corrected as necessary.
can still be pulled easily along the bar by hand.
CAUTION
Advertisement
Table of Contents
