Ignition switch
Throttle trigger
Starter handle
Unlock chain brake
Ignition switch
Starter handle
Unlock chain brake
Chain brake
Choke
Throttle trigger
lockout
Chain brake
15
WHEN THE ENGINE IS COLD
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
chain brake before starting.
It is not permitted to fill fuel above the shoulder
level of fuel tank.
Do not over fill.
(Choke position
)
pull starter handle several times until first firing
sound.
release throttle trigger for disengaging throttle
latch and returning engine to idle, and pull front
hand guard towards the operator immediately.
(Chain brake unlocked position)
WHEN THE ENGINE IS WARM
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
chain brake before starting.
starter handle.
firing sound, pull throttle trigger to release choke.
towards the operator immediately.
(Chain brake unlocked position)
CAUTION
I " position.
CAUTION
I " position.
CS-500P